Adhesion Testers – Various Testing Methods That Can Be Used

 

Attachment analyzers are utilized by most organizations that make glue tapes. There are various sorts of testing strategies that tend to utilized by organizations like shear testing, strip testing and circle tack. The support material of the tape would be covered with cement to make glue tapes. Different purchasers and practically all producers test the cement properties through various strategies, contingent upon their necessities and the accessible assets. Various tests require various types of gear.

Tape Suppliers: Tape Manufacturers

Shear Testing
One of the techniques utilized for testing bond is shear test. This testing strategy is finished deciding the inner strength or strong strength of the cement. It includes staying the tape strips between an inch wide and 3 to 10 inches long steel plates. These are then put on widespread grip analyzers. Heaps of 500 grams would then be dangled from the closures of the strips for applying consistent strain and power. The heap weight and tape aspects will change according to test determinations. Notwithstanding, the shear analyzer ought to in a perfect world be set in a chamber with controlled temperature. This test can be profoundly adhesive tape manufacturers impacted by changes in the temperature as the strength of the glue can reduce at higher temperatures.

Strip Testing
Strip testing is done to test the strength of the connection between the substrate and the sticky tape. There are numerous varieties of this tape yet the favored one includes an analyzer which can quantify the strength expected for eliminating a tape take from a metal plate at a point of 180 degrees. This test will likewise decide whether the glue encounters substrate or firm holding disappointment. Disappointment happens assuming there is glue buildup on the steel plate after the test is one. The analyzers should be adjusted cautiously once in a half year while the plates should be cleaned after each utilization with solvents.

Tack Testing
In cement tapes, tack is a property which decides the development of security when the substrate and the tape are in touch. Tack testing will decide how rapidly and emphatically the tape item can stick to its substrate. There are two trying strategies for tack testing circle tack and moving ball.